HPE Aruba 2530-8G PoE+ Switch

The Aruba 2530 Switch Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver Layer 2 capabilities with enhanced access security, traffic prioritization, sFlow, IPv6 host support, and power savings with energy-efficient Ethernet. The Aruba 2530 Switch Series is easy to use and deploy, and delivers consistent wired / wireless user experience.

• Traffic prioritization (IEEE 802.1p)
• Simplified QoS configuration
• Class of Service (CoS)
• Rate limiting
• Layer 4 prioritization
• Command-line interface (CLI)
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
• IPv6 host
• MLD snooping
• IEEE 802.3af Power over Ethernet (PoE)
• IEEE 802.3at Power over Ethernet Plus
• Auto-MDIX
• 16K MAC address table
• GARP VLAN registration protocol

• Traffic prioritization (IEEE 802.1p)
  It allows real-time traffic classification with support for eight priority levels mapped to either the queues, it uses weighted deficit round robin (WDRR) or strict priority (SP).
• Simplified QoS configuration
  It prioritizes traffic by specifying a port and priority level. VLAN-based prioritizes traffic by specifying a VLAN and priority level.
• Class of Service (CoS)
  It sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ.
• Rate limiting
  It sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic.
• Layer 4 prioritization
  It enables prioritization based on TCP/UDP port numbers.
• Command-line interface (CLI)
  It provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3) allows a switch to be managed with a variety of third-party network management applications.
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
  It automates device discovery protocol for easy mapping by network management applications.
• IPv6 host
  It allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6) supports connectivity for both protocols and provides a transition mechanism from IPv4 to IPv6.
• MLD snooping
  It forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
• IEEE 802.3af Power over Ethernet (PoE)
  It provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras.
• IEEE 802.3at Power over Ethernet Plus
  It provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras.
• Auto-MDIX
  It adjusts automatically for straight-through or crossover cables on all ports.
• 16K MAC address table
  It provides access to many Layer 2 devices.
• GARP VLAN registration protocol
  It allows automatic learning and dynamic assignment of VLANs.