Cooltek MOD1 Midi Tower mit Seitenfenster aus gehärtetem Glas schwarz / grün

Art-Nr.: 90687577
, Manufacturer's no.: JONSBO MOD1 BLACK/GR
  • Mini ITX Gehäuse mit Glasfenster
  • für ATX, mATX, mini-ITX Boards
  • Intern: 5x 2.5", 4x 3.5"
  • 2x USB3.1 Gen 1, 2x USB2.0
  • für CPU-Kühler bis ca. 175 mm, GPU bis ca. 400 mm
In the product range since: March 2017

Shortcut to the most important info:

231.55
excl. VAT
Product is no longer available
plus Shipping
MOD1 - BLACK/GREEN

The Jonsbo MOD1 case convinces users with its innovative open design. Wide customer surveys were taken in for the development of the MOD1, especially water cooling users were asked about their wishes. With the MOD1 Jonsbo created a truly impressive platform for water cooling.

The rugged exterior is highlighted with visually appealing green color elements, while it also emphasizing the high quality materials which have been processed in MOD1. The extravagant and remarkable design automatically draw attention to itself. A clearly visible highlight is the design of the extending aluminium panels and the tempered glass, which not only allow a look at the inner workings, but also ensure a constant supply of fresh air into the interior of the case. One advantage of this type: If additional fans will be installed, they can achieve a better optimum cooling for the whole system.

The chassis of the MOD1 is made of high quality 3.0 mm thick anodized aluminum. The side and top panels instead are made of 5 mm tempered glass, which give the case an impressive stability.

But not only is the exterior kept especially noticeable, the interior is certainly no less exciting. The power supply is installed in the specially designed frame behind the front panel - an extensive cable management system permits a clean installation of the cable. The power connector is located at its usual place at the rear of the case; a corresponding loop cable of the current is pre-installed.

Below the power supply there are also mountings for the hard drives. Four individually removable HDD slide can be used to install hard drives. On the top there can be installed the 3.5” drives. A special highlight of the MOD1 is the ability to use simultaneously 2.5” SSDs, which are screwed on the bottom. Another mounting place can be found under the bottom of the case, which takes a SSD.

The ventilation system of the MOD1 can be optimized through additionally fans. To achieve a better cooling effect, the top can take 3 x 120 mm fans. At the back of the case are mounting options for 1 x 120 mm fan. On the bottom of the case can be installed 3 x 120 mm fan. Behind the front panel are also mounting positions for 3 x 120 mm fans.

The MOD1 also supports 3 x 360 mm water cooling systems, which can be installed in the top or on the bottom of the case. A third one on the partition wall of the motherboard chamber and drive bay. Please check first that there will be no complications with the mainboard, before you build in such a radiator.

Two USB 3.0 and two USB 2.0 connectors are available externally. Thus, external hard disk or USB drives can be connected quickly and easily.

In addition, the MOD1 is equipped with an innovatively lighted Jonsbo badge.

Any described warranty is supplied by the manufacturer of this article and is provided at least in germany. The full warranty information, including the coverage and requirements to claim the warranty is detailed on the manufacturers website. You can find a link to this site on our brand overview. You can find more information about warranties in our FAQ.

Accessories for Cooltek MOD1 Midi Tower mit Seitenfenster aus gehärtetem Glas schwarz / grün