The JM366D643A-50 is a 64M x 64bits Double Data Rate SDRAM high density for DDR400. The JM366D643A-50 consists of 16pcs CMOS 32Mx8 bits Double Data Rate SDRAMs in 66 pin TSOP-II 400mil packages and a 2048 bits serial EEPROM on a 184-pin printed circuit board. The JM366D643A-50 is a Dual In-Line Memory Module and is intended for mounting into 184-pin edge connector sockets.
Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
Features
- PMax clock Freq : 200MHZ.
- PBurst Mode Operation.
- PAuto and Self Refresh.
- PAll inputs except data & DM are sampled at the positive going edge of the system clock (ck).
- PData I/O transactions on both edge of data strobe.
- PEdge aligned data output, center aligned data input.
- PSerial Presence Detect (SPD) with serial EEPROM
- PSSTL-2 compatible inputs and outputs.
- PSingle 2.6V
- Ó 0.1V power supply.
- PMRS cycle with address key programs.
- CAS Latency (Access from column address) : 2.5
- Burst Length (2,4,8 )
- Data Sequence (Sequential & Interleave)
In range since: 27.07.2004